INSTALLATION
For safe and optimum performance, please install the inverter in a location that is:
Dry- Do not expose it to water drips or spray.
Cool- Operate it only in ambient temperatures between 32F(0°C) and 104F (40°C ). Keep it away from
heating vents or other heat-producing equipment.
Safe- Do not install an inverter in a compartment with batteries or flammable liquids, such as gasoline or
explosive vapours.
Well-ventilated- Allow at least 2 inches(5cm) clearance above and on all sides of the unit for proper cooling.
Clean and free of dust and dirt- This is especially important if the inverter is used in a work environment.
For connecting the inverter to a battery, you need to:
Make sure that the inverter is switched off.
Attach the DC connectors to the inverter, attach the positive red (+) to the positive terminal and the negative
black (-) to the negative terminal.
CAUTION: Attaching the positive and negative incorrectly will result in reverse polarity, potentially
damaging the inverter & voiding warranty.
Tighten the bolts on each DC terminal by hand. Do not over-tighten.
Got more concerns or want to know more about our products? Visit our Customer Support Page, or call (02) 5761 0297 for quick assistance.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article