1. Turn the inverter upside down and disconnect the battery from the inverter.
2. Discharge the inverter capacitors by short-circuiting the negative and positive poles of the inverter and then pushing
the power switch in the “I” position.
3. Remove all four screws on the end panel and push the power switch in the “O” position(see Figure 1.).
4. Slide out the bottom plate in the direction of the AC end panel(see Figure 1.).
5. Using nipper pliers or a similar tool, gently pull out the fuse(s) to be replaced(see Figure 2.).
6.Replace the fuse(s) with new one(s) of the same specification (8pcs included in the package).
7. Realign the bottom panel with the enclosure and slide it back in place.
8. Screw all four screws on the AC end panel
Do you have more concerns or want to know more about our products? Visit our Customer Support Page, or call (02) 5761 0297 for quick assistance.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article